Filter
Top Products
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cob air starts a slow evaporation.
The longer you store cubes, the smaller
they get.
To remove ice:
1.
Hold tray
at
both ends,
2. Twist slightly.
Using the optional automatic ice maker
If your refrigerator has an automatic ice maker,
or if you plan to add one later (Kit No.
FRKIT94). here are a few things you will want
to know.
l
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off the ice maker
IMPORTANT:
Do not turn on the ice maker
until it is connected to the water supply.
Instructions for Ice maker water supply
hookup are attached to the back of the
refrigerator cabinet.
UP
to 8top
ke maker.
DOWN
to start
ke maker.
l
The dial or lever on the side of the ice maker
changes the size of the cubes.
l
You may hear water running when the ice
maker is working. You’ll hear ice falling into
the bin. Don’t let these sounds bother you.
l
If you remove the ice bin, raise the signal
arm to shut off the ice maker. When you
replace the bin, push it in all the way and
lower the ice maker signal arm to the ON
position.
l
Good water quality is important for good ice
quality. Try to avoid connecting the ice maker
to a softened water supply. Water softener
chemicals (such as salt from a malfunction-
ing softener) can damage the ice maker
mold and lead to poor ice quality. If a soft-
ened water supply cannot be avoided, make
sure the water softener is operating properly
and is well maintained.
C
WITH QUESTIONS OR COMMENTS
10