Russell Hobbs 10444 Coffeemaker User Manual


 
Connection to the mains supply
Check that the voltage marked on the appliance
corresponds with the supply voltage.
The appliance must be earthed. It’s supplied with
three-core mains lead and a 13A plug complying with
BS1363. To replace the fuse, use a 13A ASTA or BSI
approved fuse conforming to BS1362.
The appliance conforms to EC Directive 92/31/EEC with
respect to Electromagnetic Compatibility
If the plug needs replacing
Connect the Green/Yellow wire (Earth) to the terminal
marked E or . Connect the Blue wire (Neutral) to the terminal marked N.
Connect the Brown wire (Live) to the terminal marked L. Secure the cord grip.
If in doubt consult an electrician.
If the plug supplied is non-rewireable (moulded)
Don’t use the plug without the fuse cover in place. If you need to
remove the plug, cut it off and dispose of it. To avoid electric shock,
don’t re-use the plug or put it into a socket.
After sales service
The appliance isn’t user–serviceable. If it’s not working properly, check:
1.You’ve followed the instructions correctly.
2.The plug fuse hasn’t blown.
3.The main supply fuse/circuit breaker hasn’t blown/tripped.
If it still doesn’t work, consult your retailer. If your retailer fails to solve your
problem, and you need to return it to us, proceed as follows:
1.Pack it carefully.
2.Enclose your name, address, and daytime telephone number.
3.Tell us what’s wrong with it.
4.If under guarantee, state where and when bought, and include proof of
purchase (e.g. till receipt).
5.Send it to Customer Service Dept, at the address at the end of this leaflet.
6.They’ll give you an estimate for inspection/repair.
9
10444_IB_3-5-02 5/3/02 3:19 PM Page 9