Filter
Top Products
Installation
8
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
Electrical connection
• Electric oven and hobs must be connected to an electrical cooker powerpoint - consult
a qualified electrician. Products must be installed in accordance with the
manufacturer's safety recommendations.
• Before proceeding with the electrical connection, verify that the current carrying
capacity of the system and the socket is adequate for the maximum power rating of the
hob.
• Electrical installation of the residence and of the appliance’s plug must be earthed and
conform with the required safety regulations.
• If there is no dedicated hob circuit and a fused switch, they must be installed by a
qualified electrician before the hob is connected.
• A Fused switch must be easily accessible once the hob has been installed.
• Do not use adaptors, multiple sockets and/or extension leads.
• This appliance conforms with the requirements of the following EEC Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio
interference,
2. EEC/89/109 relating to contact with foods.
• A circuit breaker with a contact opening of at least 3 mm, rated 20A and delayed
functioning type must be installed inside the supply circuit.