Russell Hobbs T22-5000583 Hot Beverage Maker User Manual


 
Read the instructions, keep them safe, pass
them on if you pass the kettle on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
supervised/instructed and
understand the hazards involved.
Children shall not play with the
appliance.
Cleaning and user maintenance
shall not be done by children
unless they are older than 8 and
supervised.
Keep the appliance and cable out
of reach of children under 8 years.
Don’t fill above max, or the
kettle may spit boiling water.
Use the kettle only with the
stand supplied (and vice versa).
If the cable is damaged, return
the kettle, to avoid hazard.
h The surfaces of the appliance
will get hot.
L Don’t put the kettle, stand, cable, or plug in
liquid.
1 Keep the kettle, stand, and cable away from
the edges of worktops.
2 Unplug the stand when not in use.
3 Use the kettle only for heating water.
4 Don’t use it if it’s damaged or malfunctions.
household use only
U BEFORE FIRST USE
Fill to MAX, boil, discard the water, and rinse.
C FILLING
1 Put the stand on a stable, level surface.
2 Wind excess cable beneath the stand.
3 Remove the lid.
4 Fill with at least 1 cup of water, but not
above MAX.
5 If you want only 1, 2, or 3 cups of water, fill
to the 1, 2, or 3 marks inside the kettle.
6 Replace the lid, and press down to lock it.
C SWITCHING ON
7 Plug the stand into the wall socket.
8 Put the kettle on the stand.
9 Move the switch to 1.
C SWITCHING OFF
10 When it boils, the kettle will switch off.
11 To switch off manually, move the switch to
0, or simply lift the kettle off the stand.
C GENERAL
12 Pour slowly and don’t over-tilt the kettle.
13 Don’t tilt the kettle backwards, water might
get on to the control area.
14 If this happens, sit the kettle somewhere
warm for 12 hours to dry before using it.
15 Don’t worry about moisture on the stand.
The steam used to switch the kettle off is
condensed and vented under the kettle.
16 Don’t worry about discolouration on the
floor of the kettle. It’s due to the bonding of
the element to the kettle floor.
F USING WITH INSUFFICIENT WATER
17 This will shorten the life of the element. A
boil-dry cut-out will switch the kettle off.
18 To avoid cycling on and off, take it off the
stand, and leave it to go completely cold.
C CARE AND MAINTENANCE
19 Unplug the stand, and let the kettle cool.
20 Wipe inside and outside with a damp cloth.
21 Push the hook on top of the filter down,
then lift the filter out of the kettle.
22 Brush the filter under a running tap.
23 From inside the kettle, fit the bottom hook
on the filter in the bottom of the spout.
1
2
3
1
0
switch
MAX
(inside)
1
(235ml)
2
(470ml)
3
(705ml)
lid
stand
filter
hook
hook