17
2 3
4 6
7
5
1
Press the “PUSH” button to
remove the group.
Make sure the group is in rest
position; the two references must
match.
Wash the Brew Group with
UXQQLQJZDWHU:DVK¿OWHUV
carefully.
CLEANING THE BREW GROUP
The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the
FRIIHHJURXQGVGUDZHUDVVKRZQLQ¿JRQSDJH2QFH\RXKDYHZDVKHGDQGLQVHUWHGWKH%UHZ
Group, insert the grounds drawer and close the service door.
Make sure the components are in
the correct position.
The hook shown must be in the
correct position; to check its
SRVLWLRQ¿UPO\SUHVVWKH³386+´
button.
Insert the washed and dried Brew
Group.
DO NOT PRESS THE “PUSH”
BUTTON.
Insert the grounds drawer and
close the service door.
The lever on the rear part of the
group must be in contact with
the Brew Group base.