Filter
Top Products
English
12
container being filled.
When dispensing finishes “READY FOR USE” will appear on the
display.
5.5 Programming dispenser keys
All the dispensing keys , and have a self-instructing
memory. Once programmed they will dispense the same quantity
of the drink each time they are activated.
To programme (or re-programme) the and keys, set the
dosage of coffee and milk in the drink independently, using the
following two procedures.
To programme (or re-programme) the or keys:
- Switch on the machine;
- prepare the machine for use;
- place a container under the dispensing spout (fig. 1, 4);
- press and continue to press (for more than 4 seconds) the
or key.
PROGRAMMING COFFEE WITH A DASH OF MILK or PROGRAM-
MING CAPPUCCINO will appear on the display.
The machine will carry out a grinding cycle and dispense the coffee.
- Release the or key when the desired quantity of
coffee has been dispensed. This quantity is now automatically
memorised.
To programme the milk portion:
- press and continue to press (for more than 4 seconds) the key.
PROGRAMMING MILK will appear on the display.
- Release the key.
- press and continue to press (for more than 4 seconds) the
or key.
The CAPPUCCINATORE will discharge the condensation in
the spouts, take the milk and dispense it into the container.
- Release the o key.
The CAPPUCCINATORE will discharge steam from the spout.
Activate the keys briefly (less than 1 second) to obtain the pro-
grammed drink.
To programme (or re-programme) the key:
-
press and continue to press (for more than 4 seconds) the key.
PROGRAMMING MILK will appear on the display.
- Release the key.
- press and continue to press the key.
5.2 Coffee with a dash of milk
dispensing
This drink consists of freshly ground and freshly brewed coffee
dispensed by the coffee dispensing unit, to which a dash of warm
milk is added by the cappuccino dispensing unit.
- Insert the milk supply tube (fig. 1, 6) into the milk container.
- Press the key.
“COFFEE WITH A DASH OF MILK” will appear on the di-
splay.
During the dispensing process “PREBREWING” will appear on the
display, if activated by the menu (see the Instruction and Mainte-
nance manual of the MODULAR machine), while to the side of this
an icon will appear showing a container being filled.
When dispensing finishes “READY FOR USE” will appear on the
display.
5.3 Cappuccino dispensing
This drink consists of frothed milk dispensed by the CAPPUCCINA-
TORE dispensing unit to which freshly ground and freshly brewed
coffee is added by the coffee dispensing unit.
- Insert the milk supply tube (fig. 1, 6) into the milk container.
- Press the key.
“CAPPUCCINO” will appear on the display;
- Regulate the quality of froth to be dispensed (see 5.1 Froth
regulation) using the pin (fig. 1, 2).
During the dispensing process “PREBREWING” will appear on the
display, if activated by the menu (see the Instruction and Mainte-
nance manual of the MODULAR machine), while to the side of this
an icon will appear showing a container being filled.
When dispensing finishes “READY FOR USE” will appear on the
display.
5.4 Hot milk dispensing
This drink consists only of hot milk dispensed by the CAPPUCCI-
NATORE dispensing unit.
- Insert the milk supply tube (fig. 1, 6) into the milk container.
- Press the key.
“HOT MILK” will appear on the display;
- Regulate the quality of froth to be dispensed (see 5.1 Froth
regulation) using the pin (fig. 1, 2).
During the dispensing process an icon will appear showing a