Saeco Coffee Makers RI9737 Espresso Maker User Manual


 
10
SAFETY REGULATIONS - INSTALLATION
Fire safety
In case of re, use Carbon Dioxide extinguishers
(CO
2
). Do not use water or dry-powder extinguish-
ers.
Key to machine components
Coffee bean hopper
Coffee bean hopper cover
Grinder adjustment knob
Coffee dose adjustment knob
Main power button (ON/OFF)
Water tank cover
Water tank
Grounds drawer
Power cable
Drip tray + grill
Height-adjustable dispensing spout
Steam/hot water spout with pannarello
Front door
Steam knob
Coffee Brew Group
Cleaning brush
Control panel
Coffee dose per cup adjustment knob
Coffee button
Temperature ready / coffee function light
Steam function button
Steam temperature light
Alarm light
Machine on light
4 INSTALLATION
For your safety and other people's safety, carefully
follow the "Safety Regulations" in section 3.
4.1 Packaging
The original packaging has been designed and con-
structed to protect the machine during transport.
We recommend keeping the packaging material for
possible future transport.
4.2. Preliminary Operations
Remove the drip tray (10) with grill from the packaging.
• Remove the coffee machine from the packaging
and position it in a proper place in compliance with
the requirements described in the safety regulations
(section 3).
Insert the drip tray (10) into the appropriate seat.
Make sure that the drip tray, the coffee grounds
drawer (8) and the coffee brew unit (15) are
correctly placed and that the front door (13) is
closed.
Fit the cover of the coffee bean hopper (2) onto the
coffee bean hopper (1). Keep the cleaning brush
(16) to hand.
Before plugging in the machine, make sure that the
power button (5) is switched to -0-.
If the red light (22) ashes when the machine is turned
on, it means that one of the above mentioned parts is
not placed correctly.
Important Note: Carefully read the explana-
tion of all the warnings displayed by the
machine to the user by means of the lights on the
control panel (section 13).
(Fig.25) - Lift and extract the water tank (7) and
remove the cover (6). Rinse and ll it with fresh
water taking care not to over ll it. Reinsert the water
tank into the appropriate seat and replace the cover
(6) on top of it.
Always use only fresh, non-sparkling water
to ll the tank (7). Hot water or any other
liquid may damage the tank and/or the machine.