Filter
Top Products
30
1 2
5 6
3
8 9
4
7
Brew Group Washing
> maintenance > group wash
Insert the tablet as shown above.
Press
to start.
To clean the machine’s internal circuits used for brewing coffee.
To wash the Brew Group, simply clean with water as shown on page 35. This wash completes
maintenance of the Brew Group. We recommend using Saeco tablets, which can be purchased
separately.
Note: before performing this function make sure that:
1. a large enough container is positioned under the spout;
2. the appropriate tablet for cleaning the Brew Group has been inserted into the
compartment for pre-ground coffee;
WKHZDWHUWDQNFRQWDLQVDVXI¿FLHQWTXDQWLW\RIZDWHU
THE WASH CYCLE CANNOT BE INTERRUPTED.
A PERSON MUST BE PRESENT DURING THE OPERATION.
Wait for the cycle to end.
The Brew Group has been washed.
Exiting programming mode.
(see page 18)
Press
EXWWRQWRFRQ¿UP
You can check the status of
washing.
3 maintenance 3.3 group wash
3.3 group wash
3.3.1 group wash
do it now
insert tablet
and press start
group wash
please wait
3 maintenance
passage
[2/3]
wash cycle completed
please wait
1.
2.