Salton ME8DSW Coffeemaker User Manual


 
7
3. Place coffee grounds in the filter, using one level tablespoon of
drip grind coffee for each cup of brewed coffee.
4. Turn the filter basket so that the 2 guides are facing away from
you. Firmly replace the removable filter basket by pushing it
down into the filter basket cavity in the front of the Coffee
Maker. Fold the handle down. Close the Coffee Maker Lid and
snap it securely into place.
5. When you replace the thermal carafe onto the base plate, the
carafe will snap easily into position under the Auto Pause and
Pour assembly. Make sure carafe lid is properly secured onto
carafe.
6. Plug the appliance into a standard 120V AC electrical outlet.
7. The LCD will flash “12:00” until you set the time. The ON light
should be OFF. If it is accidentally lit, press the ON/OFF Button
once and the ON light will turn OFF.
Setting the Clock / Timer
Setting the Clock
1. Plug the power cord into a wall outlet. The display will flash
until the time of day is set.
NOTE: A power failure will also cause the display to flash and
it will be necessary to reset the clock.
2. To set the clock, hold the HOUR button in for 3 to 4 seconds
until the hour setting begins to change. Press the HOUR
button until the correct hour is displayed, noting that PM is
indicated on the left of the display.
3. Press the MIN button until the correct minutes are displayed. A
few seconds after you release the button, the colon between
the hour and the minutes will begin to flash, indicating that the
clock is running.