6
5. Press the power switch to the on position. The power light will
turn on.
6. If you wish to serve a cup of coffee before brew cycle is com-
plete, simply remove carafe from warming plate. Dripping will
automatically cease. Return carafe to position on warming
plate; dripping will resume (if the carafe is not returned to the
warming plate within 30 seconds, the coffee will overflow from
the filter basket).
NOTE: To keep coffee hot, return carafe to the warming plate
after serving. The warming plate will automatically keep ideal
serving temperature as long as the coffeemaker is on. Do not
allow empty carafe to remain on hot warming plate.
7. Press the power switch to the off position when not in use.
The power light will go off.
8. Unplug and allow to cool for 10 minutes between cycles.
Helpful Hints for Brewing
• The markings on the water chamber reflect the quantity of fresh
water to be used. The quantity of brewed coffee is less because
the coffee grounds absorb water.
• Never use hot or carbonated water. This will damage the appli-
ance.
• Never pour milk, liquid coffee, tea, or other liquid, except water or
cleaning solution, into the water chamber.
Care and Cleaning
1. Make sure power switch is in the off position.
2. Unplug and allow to cool completely before cleaning.
3. Open hinged filter lid on top of unit and lift filter straight up to
remove. Discard paper filter and coffee grounds.
4. Wash and dry all removable parts. If necessary, use a small
brush to clean carafe lid.
5. Replace filter by sliding it down securely onto the filter holder.
Close lid.
6. Clean inside of water chamber and filter lids and the outside
of the coffeemaker with a damp cloth.
CAUTION: DO NOT IMMERSE CORD, PLUG OR COFFEE-
MAKER UNIT IN WATER OR OTHER LIQUID.