Filter
Top Products
BEFORE USING FOR THE FIRST TIME
CAUTION: Use extreme care when handling the Blade Assembly.
Do not touch the Blades with your fingers. The Blades are very
sharp and can cause injury if touched.
1. Carefully unpack the Blender, Blending Jar, and all parts.
2. Wash the Cap, Blending Jar and Blending Jar Lid in warm soapy
water. Rinse and dry thoroughly.
3. Make sure the cord is unplugged and press and release the
OFF/PULSE Button.
CAUTION: To protect against risk of electrical shock, do not place
Motor Housing, plug or cord in water or any other liquid.
4. Wipe the Motor Housing clean with a moistened cloth.
Dry thoroughly.
GETTING TO KNOW YOUR SALTON
®
PERSONAL BLENDER
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION
8.
9.
FIGURE 1
7.
1.
2.
4.
3.
5.
3
6.
1. Cap (P/N 71152)
2. Blending Jar Lid (P/N 71153B)
3. Pour Spouts
4. Blending Jar (P/N 71154)
5. Blade Assembly
6. Motor Housing
7. ON & OFF/PULSE Buttons
8. Power Cord with
Polarized Plug
9. Non-Slip Rubber Feet
(NOTE: All replacement lids are black in color.)