Filter
Top Products
15
GB
Setting a Standing Time
The Hold Time can be used to set a standing time automatically
(without microwave cooking). You do not need to watch the clock; the
oven will beep when the standing time is over.
Multistage Cooking
Your microwave oven can be programmed to cook food in up to four
stages (the convection, MW+Oven and Preheat mode can not be used
in Multistage cooking). Example: You wish to defrost food and cook it
without having to reset the oven after each stage. You can thus defrost
andcooka1.8kgchickeninfourstages:
• Defrosting
• Standing for 20 minutes
• Microwave cooking for 30 minutes
• Grill for 15 minutes
☛ Defrosting and standing must be the first two stages. Combination
and Grill can only be used once during the remaining two stages,
However microwave can be used twice(at two different power
levels).
1. Press the Hold/Delay ( ) button.
Result:
The follwing indication isdisplayed :
(Hold/Delay mode)
2. Select the standing time by turning the dial knob().
3. Press Start ( 1min+) button.
Result:
Theovenbeepswhenthestandingtimeisover.
1. Press the Auto Defrost ( ) button and set the weight by
turning the dial knob the appropriate number of times (1.8
kg in the example).
2. Press the Hold/Delay( ) button and set the standing
time by turning the dial knob the appropriate number of
times (20 minutes in the example).
3. Press the POWER LEVEL()button.
Set the microwave power level by pressing the POWER
LEVEL( ) button to select the appropriate Power Level
(450W in the example)
4. Set the cooking time by turning the dial knob()(30
minutes in the example).
5. Press the GRILL( ) button and set the cooking time by
turning the dial knob the appropriate number of times (15
minutes in the example).
6. Press Start ( 1min+) button.
Result:
Cooking starts:
◆ When cooking has finished, the oven will
beep and flash “0” four times. The oven will
then beep one time per minute.
C100_C101_GB.fm Page 15 Wednesday, February 20, 2002 3:46 PM