Filter
Top Products
22
EN
Hob Use (Continued)
2. Use the
or
timer setting control sensors to set the desired amount of time, for ex-
ample, 15 minutes, after which the cooking zone will automatically switch itself off.
The safety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the timer’s control sensor
.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the
or
timer setting control sensors. After the set period of
time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds
as confirmation and the timer display indicates .
To make the settings more quickly, touch any of the
or
timer setting control
sensors until the desired value is reached.
If the
timer setting control sensor is touched first, the time setting will begin at 99
minutes; if the
timer setting control sensor is touched first, the time setting will
begin at 1 minute.
Countdown timer
For the countdown timer to be used, the appliance must be switched on but all the cooking
zones must be switched off.
1. Touch the timer’s control sensor .
will appear in the timer display.
2. Set the desired period of time using the
or
timer setting control sensors.
The countdown timer function is now activated and the remaining time appears in the timer
display.
To adjust the remaining time, touch the timer’s control sensor and change the setting using
the
or
timer setting control sensors .
C61RCCN_XSA-00043A_EN.indd 22 2007-02-22 ¿ÀÈÄ 2:06:46