Filter
Top Products
Setting Up _13
01 SETTING UP
REATTACHING THE REFRIGERATOR DOORS
3
4
Dispenser
Door Tube
Cabinet
Tube
Dispenser
Door Tube
Cabinet
Tube
Red Clip
(1/4”)
Red Clip
(1/4”)
Dispenser
Door Tube
Cabinet
Tube
Dispenser
Door Tube
Cabinet
Tube
Red Clip
(1/4”)
Red Clip
(1/4”)
5
3
5. Position the Top Table(
2
) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(
1
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
1
4. Connect the water line (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
The clip is enveloped inside of the top cap.
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
coupler
DA68-01812G.indb 13 2009.8.10 9:7:58 AM