Filter
Top Products
33
INSTALLATION INSTRUCTIONS
INSTALLING THE WATER DISPENSER LINE
Secure the water line.
- Using clip ”A”, fix the water line to the wall (the back of
refrigerator).
- When the water line is secure, make sure whether the water
line is not excessively bent, pinched or squashed.
Connect the water line to the refrigerator.
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the fig-ure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure
on the right.
Attach the purifier lock stations.
- Hold the purifier lock stations in the appropriate position
(under the sink for example) and fix it tightly into place
where to screw.
CLIP A
WATER LINE
WATER LINE
COMPRESSOR COVER OF
REFRIGERATOR
CONNECTION NUT
TIGHTENING
BAND
PURIFIER
WATER TUBE
PURIFIER
LOCK STATIONS
TWO PURIFIER LOCK
STATION
TWO PURIFIER LOCK
STATION
DA99-00494B (EN)-0.7 7/22/04 12:37 PM Page 33