Filter
Top Products
setting up your dishwasher _9
6
Child Lock
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To lock and unlock the buttons on the control panel, hold the Child Lock
button down for three (3) seconds.
- When Power is On : Hold down the Child Lock button for three (3)
seconds.
- When Power is Off : Push the Power button fi rst, and then hold down
the Child Lock button for three (3) seconds.
7
Delay Start
(DISPLAY)
Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
indicates the time at which the wash will be started.
Displays wash information, Delay Start hours, and Error messages.
If an error occurs during an operation, an error message is displayed with a
warning sound. Refer to the information codes page. (see page 25)
8
Low Rinse
When Low Rinse remains illuminated, there is no rinse agent in the
dispenser. Refi ll the rinse aid dispenser.
9
Start/Drain
To start the cycle, press the Start/Drain button before closing the door.
To cancel a cycle currently running and drain the dishwasher, hold down
Start/Drain buttons for three (3) seconds.
You can select options (Delay Start, Sanitize, Half Load, or Storm Wash) before starting a cycle. If you
change the cycle after selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
- Touch the center of each keypad using one fi nger. Do not push.
- Clean the touch control’s surface regularly with a soft, damp cloth.
- Be careful not to touch more than one touch key pad at a time, except as directed.
01 setting up your dishwasher
OO X
DW80F800_DD81-01554A-01_EN.indd Sec3:9DW80F800_DD81-01554A-01_EN.indd Sec3:9 2013-06-04 11:24:332013-06-04 11:24:33