Filter
Top Products
Before using for the fi rst time _15
02 BEFORE USING
Before using the product for
the fi rst time
USING THE SOUND ON/OFF FUNCTION
1. While holding down the Delay Start and Half Load buttons, press the Power button to
access the setting to activate/deactivate the Sound On/O function.
2. Press the Sanitize
button to activate or deactivate the Sound On/O function.
- “Rinse Refi ll
” indicator turns on to indicate that Sound On function has been activated.
- “Rinse Refi ll
” indicator turns o to indicate that Sound O function has been activated.
Even though Sound O function has been activated, the error sound plays when an error occurs.
3. To exit the Sound On/O setting, press the Power
button.
USING RINSE AID
Filling the rinse aid reservoir
As soon as the rinse aid refi ll indicator lights up on the control panel , refi ll with rinse aid. Your dishwasher
has been designed to use liquid rinse aid only.
Using a powdered rinse aid will clog up the reservoir opening and cause the dishwasher to malfunction.
Rinse aid improves the drying performance of the dishwasher.
Do not add regular detergent into the rinse aid reservoir.
1. Remove the rinse aid reservoir cap by rotating it counterclockwise.
2. Fill the rinse aid reservoir with rinse aid.
Use the viewing port when fi lling the rinse aid.
Do not fi ll the reservoir above the rinse aid level as the rinse aid
may overfl ow during the wash cycle.
3. Turn the rinse aid setting to a rinse aid amount between 1 and 6. The
higher the level, the more rinse aid will be used.
If you are unable to rotate the rinse aid leveller with ease, try using a
coin.
4. Close the rinse aid reservoir cap by rotating it clockwise.
CAUTION
CAUTION
DD68-00093B_EN-AU.indd 15DD68-00093B_EN-AU.indd 15 11/23/2011 10:54:44 PM11/23/2011 10:54:44 PM