Important safety instructions _5
SURFACE COOKING UNITS
Never leave surface units unattended at high heat settings. Boilovers cause smoking and greasy
spillovers that may ignite.
Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the range.
Do not operate the cooktop when there is no cookware. If the cooktop operates without a cookware,
the control knob will become hot.
Never use the glass cooktop surface as a cutting board.
Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls
have been turned off.
Be careful when placing spoons or other stirring utensils on glass cooktop surface when it is in use.
They may become hot and could cause burns.
Use proper pan sizes. This appliance is equipped with surface units of different size. Select utensils
having fl at bottoms large enough to cover the surface unit heating element. The use of undersized utensils
will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper
relationship of utensil to burner will also improve effi ciency.
Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic,earthenware, or other glazed
utensils are suitable for range-top service without breaking due to the sudden change in temperature.
Utensil handles should be turned inward and not extend over adjacent surface units. To reduce
the risk of burns, ignition of fl ammable materials, and spillage due to unintentional contact with the utensil,
the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent
surface units.
Read and follow all instructions and warnings on the cleaning cream labels.
Be sure you know which control knob operates each surface unit. Make sure you turned on the correct
surface unit.
Always turn the surface units off before removing cookware.
When preparing fl aming foods under the hood, turn the fan on.
Keep an eye on foods being fried at high or medium high heat settings.
APPLIANCE OUTLETS
The 120V appliance outlets located on the control console may be used to run portable
appliances placed on countertops beside the range.
The outlets operate independently and are not affected by range control settings.
Do not place portable appliances on the cooktop.
Damage to the portable appliance could result if
the cooktop is hot.
Circuit
Breakers
Appliance
Outlet
Appliance outlet circuit breakers: The circuit
breakers for the appliance outlets on your range
are located on top of the control console.They are
rated for 15 amps, that may trip if the appliance
plugged into it exceeds 15 amps. To reset the
circuit breaker, press the switch of located on the
control console.
If appliance outlet don’t operate, test out your small
portable appliance by plugging into other outlets.
FCQ321HTUX_XAC DG68-00153A.indb 5 2008-04-10 ¿ÀÀü 10:18:57