Filter
Top Products
8
Operation
Selecting the Display Weight
The first time you plug the power cord into an outlet, or after there has
been an interruption in powerthe display will show all. At this point, you
can select the weight system for the display. You can choose between
pounds(LBS) or kilograms (KG). To do so you can choose between
pounds(LBS) and kilograms(KG).
1 Press “0” immediately after plugging in your microwave. The
display will show:
If the display does not shows “Kg”, you will need to unplug the
microwave and then plug it in again in order to change to the
weight selection.
2 Press “0” repeatedly to select the weight system you wish to use:
When you have selected the weight system you want to use,
press the Stop/Clear button to end this procedure.
Setting the Clock
1 Press the Clock Button. The display will show:
2 Use the Number buttons to enter the current time. You must
press at least three numbers to set the clock. For example, if the
current time is 5:00, enter 5,0,0.
3 Press the Clock button again. A colon will blink, indicating that
the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the Clock button.
Kg g Oz. Lbs. QTY.
START ENTER TIME HEAT MICRO
Kg g Oz Lbs QTY
Kg g Oz. Lbs. QTY.
START ENTER COOK TIME HEAT MICRO
Kg g Oz Lbs QTY