Filter
Top Products
12
Operation Guide
Two Stage Programming
1 Touch Defrost.
Display window shows "PL:30".
2 Enter defrosting time (up to 99 min. 99 sec.) by touching the
number pads. For example, to set 3 minutes 50 seconds, touch
3, 5 and 0 in sequence. Display window shows “3:50”.
3 Touch Power Level. For example, to set PL:Hi, touch the Power
Level pad once. Display window shows "PL:Hi”.
4 Enter cooking time (up to 99 min. 99 sec.) by touching the
number pads.
For example, to set 4 minutes 50 seconds, touch 4, 5 and 0 in
sequence. Display window shows "4:50".
Time Cooking con't
5 Touch Start.
The first stage defrosting time appears in the display window and
counts down. As soon as the defrosting finishes, the second
stage cooking time appears automatically and counts down.
Start(MW630WA/MW630WB)
One touch allows the oven to begin.
If the door is opened while the oven is operating, the cooking will pause.
The Start pad must be touched again to continue the cooking operation
after the door is closed.
Pause/Cancel(MW630WA/MW630WB)
Use the Pause/Cancel pad to:
1. Erase if you make a mistake during programming.
2. Cancel the minute timer.
3. Stop the oven temporarily during cooking.
4. To cancel a program during cooking, touch twice.
How to Correct Programming Errors
Mistakes made when entering program information can be corrected by
touching the Pause/Cancel pad and then re-entering the correct
program.
NOTE
A cooking program entered in one stage can not be changed after you
have started to enter the program for the next stage. To correct, the
Pause/Cancel pad must be touched and all cooking instructions re-
entered beginning with the first stage.
No changes in programs can be made after the oven has started
operating. To make a change you must touch the Pause/Cancel pad
and re-program the entire sequence. When making changes in this
manner be careful to take into account the cooking time already elapsed
in the old program before entering the new program.
XGt~]XW~hTUGGwGXYGGmSGhGYWSGYWWXGG`aWWGht