Filter
Top Products
INSTALLING THE APPLIANCE SAFETY WARNINGS
Selecting the location for appliance.
• Install the appliance properly on the flat and
firm surface.
Install appliance in the available space.
• Allow 1 foot(30cm)from the ceiling, and 2
inches( 5cm ) from the wall.
Install appliance in the appropriate location.
• Place the appliance away from sunlight or heat.
Install appliance in a damp place.
• There is a risk of eletric shock or
malfunctions.
Specification of electric power.
• The electric power specification of the
appliance is attached inside at the top of
the door or outside at the back.
Do not use any extension cords or
double adaptors.
• Do not plug several appliances into the
same multiple power board. This could
cause over heating and the risk of fire.
Earthing the appliance.
• If the socket is the 2-legged type, the
appliance must be earthed.
• Do not connect the earthing wire to the gas
pipes or telephone lines.
Replacing the lamp.
1. Unplug the power cord from the socket.
2. Remove Chilled tray.
3. Unscrew by plus-type driver then take out
lamp cover. (optional model only)
4. Turn the lamp counter clockwise.
5. Replace new lamp same specification as
original one.
Warning ! : Disconnect power supply before
replacing the lamp.
About 30cm
About 5cm
About 5cm