Filter
Top Products
SETTING UP THE REFRIGERATOR
ICE MAKING
Step 1
Clean up inside of the refrigerator with a
clean cloth.
Fill the ice tray with
water at about 80% of
its capacity, or at its
“water level” indicator.
For making quick ice
cubes, the temperature
control button must be
set to “MAX”
To take the ice cubes of the
the ice cube tray, you should
gently twist the ice tray (As
shown), Do not bend it over.
1)
3)
5)
4) The water will become the ice cubes with in
3-4 hours. Please remove the ice tray by
pulling it out. Never use any kind of
instrument. This may cause damage on the
freezer.
2) Carefully place the ice tray on the freezer
shelf otherwise the splashed water will be
frozen and cause the ice tray is stuck hard.
Step 3
Close the door and let the refrigerator
operate for 2-3 hours.
Step 4
Check the refrigerator temperature by
touching inside the freezer.
Step 2
Insert the power plug into the socket
while keep the door open for checking
the interior light, Then turn the
temperature control button to “MAX”.
Step 5
The appropriate temperature should be
controlled by turing the temperature
control button to “4”, or the desired
temperature can be adjust. Now your
refrigerator is ready to work.
Temp. Control
NOTE : After unplug the appliance, wait for about 5minutes before
restarting.
Wait 5
minutes