Filter
Top Products
INSTALLING THE REFRIGERATOR/FREEZER
4
Allow an adequate space and install the
refrigerator/freezer on a firm, level floor.
• If the appliance is not level, there may be
unusual noises and poor cooling.
• Wait for at least one hour before plugging
the appliance in.
Clean the refrigerator/freezer.
• Wipe and clean the appliance inside and
outside with a damp cloth and dry completely.
Plug the refrigerator/freezer into a wall
socket used exclusively by this
appliance.
• This appliance must be properly
grounded.
Use of a grounded socket exclusively for the appliance:
• If you are using a socket with a grounded terminal, you do not
require a separate grounding connection.
Use of a non-grounded socket:
• Connect the “grounding wire” to the copper plate and bury
it at a depth of at least 10 inches in the ground.
The appliance must be positioned so that the plug is
accessible after installation.
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.
Place the food in the refrigerator/freezer.
• It is recommended that you wait for the
appliance to cool for 2-3 hours before
storing food in it.
LEVELLING
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
10 inch
Warning