14_ Setting Up
LEVELING THE REFRIGERATOR
After putting the doors back on the Refrigerator, make sure the Refrigerator is level so that you can make final
adjustments.
If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask more energy bills.
For example, when the left side is lower than the right side, insert a flat-blade screwdriver into a notch on the left
control lever, and turn it clockwise or counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and counterclockwise to lower it.
For the left side is higher, do it with right lever.
Setting up your Refrigerator
Control Lever
Screwdriver(-)
When the left side is lower.
Control Lever
Screwdriver(-)
When the left side is higher.
5. Remove the Freezer door from
the rails.
Both control levers must be surely touching the floor to avoid the possible personal injury or property damage
because of tipping.
WARNING
Removal of the freezer door (DRAWER TYPE - RB216,RB196) - CONT’D