Operating _21
02 OPERATING
The ice maker will produce 8 cubes per cycle - approximately
100~130 cubes in a 24-hour period, depending on freezer
compartment temperature, room temperature, number of door
openings and other use conditions.
Throw away the first few batches of ice to allow the water line to
clear.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will
stop producing ice.
After the icemaker has been turned on again, there will be a time
delay before the icemaker resumes operation.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy,taste stale and shrink.
So if you don’t want to make ice, press the Ice Off button.
Cooling Off
mode
Test Button
Cooling Off Mode (“OF & OF” code on the display)
This function is for store display refrigerators. It is not for customer use.
Test button
If ice doesn’t come out, pull out the ice maker and press the Test Button located on the lower
front side of ice maker. (Refer to the picture for the location.)
CAUTION
In Cooling Off Mode, the refrigerator works but doesn’t make cool air. To cancel this mode,
press the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-dong”
sound is heard and the unit will now cool.
CAUTION