Filter
Top Products
Operating _27
02 OPERATING
To remove - Pull the brackets
(
1
)
upward until you hear a
clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets
(
1
)
and push down until it locks into place.
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight out.
To relocate - Place the drawer onto the rails by tilting it up.
Lower the drawer into place until it is horizontal
and slide the drawer in.
To remove the drawer - Pull the drawer out fully.
Tilt up the rear of the bin and lift it
out to remove.
To replace the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
To replace the divider - Hook the top corners of divider over
the hole of the bin.
1
1
2
DA68-01812H.indb 27 2009.8.10 9:5:4 AM