Filter
Top Products
12_ operating
Operating your French Door
Refrigerator
USING THE CONTROL PANEL
( 1 ) Energy
Saver
Hold 3 sec for
°C↔°F
Touching this button turns Energy Saver
mode on and off. When you turn Energy
Saver on, the Energy Saver icon lights.
Turn Energy Saver off and the icon
goes off. The Energy Saver function
automatically turns on when power is
supplied to the refrigerator.
If condensation or water drops appear
on the doors, turn the Energy Saver
mode off.
Touch and hold this button for 3
seconds to switch the temperature units
between °C and °F.
( 2 ) Freezer
(Hold 3 sec
for Power
Freeze)
Touch this button to set the freezer to
your desired temperature.
You can set the temperature between
-8°F and 5°F (between -23°C and
-15°C). Touch and hold this button for 3
seconds to decrease the time needed
to freeze products in the Freezer. It can
be helpful if you need to quickly freeze
easily spoiled items or if the temperature
in the freezer has warmed dramatically
(For example, if the door was left open).
( 3 ) Ice
Type/Water
Hold 3 sec for
Filter Reset
Touch this button to select the ice or
water function. You can select water or
the types of ice(cubed/crushed ice).
Each time you press the button, the
cubed and crushed
ice modes alternate and the Cubed or
Crushed ice icon lights up, indicating
your selection.
After you replace the water filter, touch
and hold this button for 3 seconds to
reset the water filter life indicator.
( 4 ) Alarm
Hold 3 sec for
Lighting
To turn the door open alarm on and off
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than three minutes.
The beeping stops when you close the
door. The door alarm function is preset
to On in the factory. You can turn it
off by touching and then releasing this
button. You can turn it back on in the
same fashion. The icon lights up when
the function is on.
If you touch and hold the Alarm/Lighting
button for 3 seconds, the dispenser LED
Lamp will stay on.
( 5 ) Fridge
Hold 3 sec for
Power Cool
Touch this button to set the fridge to
your desired temperature. You can set
the temperature between 34°F and 44°F
(between 7°C and 1°C). Touch and hold
this button for 3 seconds to decrease
the time needed to cool products in
the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items
or if the temperature in the fridge has
warmed dramatically (For example, if the
door was left open).
( 6 ) Ice Off
Hold 3 sec for
Child Lock
If you don’t want to make more ice,
touch the Ice Off button.
Touching this button for 3 seconds turns
on Child Lock which locks the display
panel and dispenser buttons so the
buttons can not be used. The Child Lock
icon lights up to indicate you’ve activated
the Child Lock function. Press 3 seconds
to unlock.
( 7 ) Ice Off
If you don’t want to make more ice,
touch the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
-
There is enough ice in the ice bucket.
-
You want to save water and energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit, press the Ice Off (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice Off
Indicator ( ) illuminates.
(RF263T**)
(RF263B/N**)
8
7
1
2
3
5
6
4
DA68-02601A(EN+FR+ES)-0.2.indb 12 2012.3.31 9:49:44 AM