Filter
Top Products
Operating _27
02 OPERATING
1. Tilting Pocket
To remove - Pull the brackets
(
1
)
upward until you hear a
clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets
(
1
)
and push down until it locks into place.
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight out.
To relocate - Place the drawer onto the rails by tilting it up.
Lower the drawer into place until it is horizontal
and slide the drawer in.
3. Freezer Drawer Bin
To remove the drawer - Pull the drawer out fully.
Tilt up the rear of the bin and lift it
out to remove.
To replace the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
To replace the divider - Hook the top corners of divider over
the hole of the bin.
REMOVING THE FREEZER ACCESSORIES
1
1
2