Filter
Top Products
Operating _31
02 OPERATING
1
REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
To remove - Pull the brackets
(
1
)
upward until you hear a
clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets
(
1
)
and push down until it locks into place.
3. Freezer Drawer Bin
To remove the drawer - Pull the drawer out fully. Tilt up
the rear of the bin and lift it out to
remove.
To relocate the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
To relocate the divider - Hook the top corners of divider over
the hole of the bin.
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight out.
To relocate - Place the drawer onto the rails by tilting it up.
Lower the drawer into place until it is horizontal
and slide the drawer in.
1
2