Filter
Top Products
Setting up your French Door Refrigerator
10_ Setting Up
12
10
11
5. With a Philips head screwdriver, remove the two screws (
10
)
attached to the lower left and right door hinges.
With an wrench(3/16”), remove the two hex head bolts (
11
)
attached to the lower left and right door hinges.
Remove the lower left and right door hinges (
12
).
4. Lift the door straight up to remove.
3. Remove the 3 hex head bolts (
7
) attached to the upper
left and right door hinges with a wrench(10mm).
With a Philips head screwdriver, remove the ground
screw (
8
) attached to the upper left and right door
hinges.
Remove the upper left and right door hinges (
9
).
9
7
8
2. Disconnect two connectors (
3
) at each side of
the top cap and the one connector(
4
) on
left side door. Remove the tube (
5
) with
pressing the dark gray color part (
6
) of the
water line coupler.
5
6
4
3
CAUTION
If a red clip is on the coupler,
it must be removed before removing
the tube.