Filter
Top Products
24_ Operating
Operating your French Door
Refrigerator
Using the ice Dispenser
Place a glass underneath the ice dispenser and push gently against the dispenser
lever with your glass.
Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
CAUTION
When Cubed Ice is selected after using the Crushed Ice mode, a small
amount of residual crushed ice might be produced.
PUSH
Controlling the fridge temperature
The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge
button repeatedly until the desired temperature is shown in the temperature display. The temperature will
move 2°F degrees each push(38°F → 36°F → 34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature
control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired
temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be
reflected in the digital display.
- The temperature of the Freezer, fridge or Pantry Room may rise
when you open the doors too frequently, or if a large amount of
warm or hot food is placed inside.
- This may cause the digital display to blink. Once the Freezer and
fridge temperature return to their normal set temperatures, the
blinking will stop.
- If the blinking continues, you may need to “reset” the Refrigerator.
Try unplugging the appliance, wait for around 10 minutes and then
plug the power cord back in.
- The temperature of the Pantry Room may be a little different according to the location inside.
- If communication between Display and Main Controller errors, Pantry Display light may blink.
Once the communication return to their normal set temperatures, the blinking will stop.
If the blinking continues for a long period of time, please contact to Samsung Electronics Service Center.
Using the Power Cool
For a quick Fridge cool down, use Power Cool function. Press and
holding the button for 3 seconds.
Then, power cool indicator will lit and activate the power cool mode
independent of fridge set temperature. If you select Power Cool, the
inside temperature of the fridge will decrease for about two and a half
hours or until 25°F. just press and holding the button for 3 seconds
again to cancel the Power Cool mode. Then, indicator will stop lit and
activate for freezer setting temperature again.
USING THE COLD WATER DISPENSER
Press the Ice type or water button to select the type of you want
NoICE
Select this if you want
to turn ice maker off.