Filter
Top Products
Setting Up _13
01 SETTING UP
3
4
5. Position the Top Table (
2
) in place.
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened,
reinsert the Hinge Cover cap (
1
) and close the doors.
When reattaching the hinge cover, make sure that the
wires are not pressed or damaged by the hinge cover.
1
2
REATTACHING THE REFRIGERATOR DOORS
4. Reconnect the 3 electrical connector(
3
) found above
the upper left door hinge.
Reconnect the electrical connector(
4
) found
above the upper right door hinge.
Connect water line and insert two clips.
The Water Line must be fully inserted to the marked line to prevent water leakage from the dispenser.