Filter
Top Products
4
MAINTENANCE & CLEANING
Interior parts
Dismantle all shelves, bars, trays, covers and
drawers, and clean with a warm damp cloth wiper.
Door gasket
Clean door gasket with care. Wipe the recessed
place with chopstick wrapped with cotton strip.
Water tray
Screw off the screw in the compressor cover, pull
up the water tray lightly and draw it out. Fix it as
before after washing.
Defrost approach
Thick frost layer depositing on the interior wall
will affect refrigeration effects. On that account,
you may cut off the power after taking out the
foods and placing somewhere in good package.
Wipe off the water soil with a soft cloth when the
frost layer thaws. Afterwards, switch on the power
and restart the machine to reset the temperature.
Cautions:
Never place the refrigerator upside down and
horizontally. If titling is required, the angle
between compartment body and the ground
shall be at least 45 .
In the initial use, remove the four sponge tapes
from the glass shelf and fit the shelf.Embed the
protuberance at both sides to the grooves to fix
them properly.
The intervals between plug pulling and plugging
shall be more than 5 minutes.
Never move the refrigerator by door handle or
impose large force on the handle up and down.
9
Remove the four sponge tapes from the glass
compartment shelf, assemble the shelf correctly
and embed the protuberance at both sides to the
grooves to fix them properly.
Clean the inner and outer of the unit using warm
and wet cloth (some detergent is allowed in the
warm water)
Initiate the power one-hour later and watch the re
-frigerator top. If deepfreeze is needed, press the
deepfreeze button to activate the deepfreeze func
-tion indicated by the indicator. If deepfreeze is not
required within 3 hours, then repress the deepfreeze
button, and the deepfreeze indicator will go off,
meaning that the unit has exited the deepfreeze
status. In case that the deepfreeze function is not
cancelled manually, the unit will quit automatically
after 3 hours. Then store the foodstuff 2-3 hours later.
Caution:
After using the freezer, don't forget to shut the drawer before closing the door.
Before connecting to the power, please check whether the power voltage is in permission.
The rated voltage is 187-242V. If your power voltage is in discrepancy, an automatic
voltage transformer above 500W shall be necessary. You can get the suitable products
from the market.
Suggestion: As for the need of storing vast food, making ice or expediting cold air, you may
draw out the tray and frost the food directly on the evaporator shelf.
ASSEMBLING OF BOTTLE RACK
Fix the bottle rack onto the glass shelf as
described in the left demonstration.
Before assembling
After assembling
PREPARATIONS BEFORE USE
PREPARATIONS BEFORE USE