Samsung RL56* Refrigerator User Manual


 
10_ Operating
CHECKING THE CONTROL PANEL
Each time you press the button, a short
beep will sound.
1
Fridge
Press the Fridge button to set the fridge to desired
temperature from the range between 1°C and 7°C.
Default set temperature is set on 3°C and each
time you press the Fridge button, temperature
will change in following order and temperature
indicator will display the desired temperature.
(
TYPE A, B
)
(
TYPE C
)
Press and hold this button for 3 seconds to
activate the Vacation function.(
TYPE A
)
2
Freezer
Press the Freezer button to set the freezer to desired
temperature from the range between -17°C and -23
°C. Default set temperature is set on -20°C and each
time you press the Freezer button, temperature will
change in following order and temperature indicator
will display the desired temperature.
(
TYPE A, B
)
-20 -2 -22 -2 -2 -2
- - - - - -
(
TYPE C
)
Fridge or Freezer temp indicator will blink
when temperature in the fridge or freezer
compartment goes up dramatically by
storing warm food or frequent door opening.
(Fridge or Freezer temperature indicator will stop
blinking when temperature in the fridge or freezer
becomesnormal.Iftemperatureindicatordoes
not stop blinking after several hours, please
contact your service center.
Press this button for 3 seconds to activate the
Power Freeze function. Power Freeze indicator
(
) will light up and the refrigerator will speed up
the time to needed to freeze products in the
freezer. This function will be activated for 72 hours
and freezer indicator will display -23°C. This
functionswitchesoffautomatically.Whenthe
Power Freeze process is completed, the Power
freeze indicator switches off and the freezer
switches back to the previous temperature
setting.Whenyouusethisfunction,theenergy
consumption will increase. To deactivate this
function, press the Freezer button for 3 seconds.
Ifyouneedtofreezelargeamountoffood
stuff, activate Power Freeze function
24 hours before.
3
Alarm
1. Door alarm
Press this button to activate the Door alarm
function. Alarm indicator (
) will light up and the
refrigerator will alert you with alarm sound if the
refrigerator door is kept open for longer than 2
minutes. To deactivate the this function, press the
Alarm button again.
2. Temperature Alarm
(For RL60GQ**, RL58GQ** models)
Press this button to activate the Temperature
alarm function. The alarm indicator ( ) will
lightup.Ifthefreezercompartmentistoowarm
because there has been a power failure, the signal
of“--”ashesonthedisplay.WhentheFreezer
button is pressed, the “warmest temperature”
which has reached in the freezer compartment is
ashedonthedisplayforveseconds.Then
the actual temperature is indicated. To deactivate
the Temperature Alarm function, press the Alarm
button again.
This warning may operate ;
•whentheapplianceisturnedon
•thefreezercompartmentistoowarmduetoa
power failure
Operating your refrigerator
(TYPE A) (TYPE B) (TYPE C)
2
3
4
6
5
1
6