Filter
Top Products
setting up _11
01 SETTING UP
3
4
5
2
1
setting up your side-by-side
refrigerator
2. Removing the freezer door
A few things to mention first.
eful not to pinch the water tubing and wire harness on the door.
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
7
6
Be careful not to pinch
the water tubing and
wire harness on the
door.
2. Remove hinge screws
3
and the ground screw
4
by turning counter-clockwise, and take off
the upper hinge
5
. Be careful that the door does not fall on you as you are removing it
6
by carefully lifting the door straight up
7
.
8
using a hex wrench.
DA99-02028A(HM09')-EN(0.0).indd 11 2009.6.10 5:7:53 PM