Filter
Top Products
CAUTION
01 SETTING UP
setting up your side-by-side
refrigerator
Connecting the water line to the refrigerator
cap from water line on the unit and insert compression nut to the water line on the unit
after disassembling from provided water line.
2. Connect both water line from the unit and water line provided kit.
Only connect the water line to a drinkable water source.
make sure you get a snug, leak-free connection.
Before being used, the leakage in these places should be examined
WATER LINE INSTALLATION.
except the retail price includes
installation cost.
Installer for the installation if needed.
Installing the water filter.
indicator sticker on the filter as shown.
future. For example, if you install the water filter in March,
Next, remove the fixed cap by turning it counter clockwise.
filter.
position and insert the filter into the filter housing.
5. Slowly turn the water filter clockwise 90º to align
with the indication mark on the cover, locking the
filter in position. Make sure that the indicator is
lined up with the “lock” position. Remember, do
not over-tighten.
If your model contains wine shelf, you should
remove the wine shelf before installing water
filters.
setting up _19
Sticker
(Month indication)
2
3
1
Cover filter
Align the indication
mark with lock position
Separation
of red cap
DA99-02028A(HM09')-EN(0.0).indd 19 2009.6.10 5:8:15 PM