Filter
Top Products
20
INSTALLATION OF THE REFRIGERATOR
Check the dimensions of your entrance door to determine whether the refrigerator can pass
through it.
Dimension
(inch)
Width
Capacity (Cu. Ft)
Model
RS25
****
25
35 3/4"
69 3/4"
68 3/4"
34 1/4"
29 1/2"
RS26
****
26
35 3/4"
69 3/4"
68 3/4"
35"
29 1/2"
with door
Case Height
without door
with door
Depth
without door
Checking the Dimensions of your Entrance Door
1 inch
1/8 inch
1 inch
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See “Separating the water supply line from the refrigerator” on the next page.
Selecting the Location for the Refrigerator
Allow sufficient space to circulate the air at the internal cooling system.
•
When refrigerator has not enough space, the internal cooling system may not work correctly.
NOTE
•
Allow clearance to the right, left, back and top when installing the refrigerator.
This has the advantage of reducing power consumption.
•
Do not install the refrigerator where the temperature will go below 50°F(10°C).
NOTE
DA68-01365B REV(0.9) 5/3/06 10:10 PM Page 20