Filter
Top Products
15
OPERATING INSTRUCTIONS
CHANGING THE INTERIOR LIGHT
INTERIOR LIGHT IN THE REFRIGERATOR .
Before changing the interior light, unplug the
refrigerator
from the power supply. If you
have difficulty changing the light, contact your service center.
WARNING
Place a flat screwdriver under
the light cover hooks and push in
the direction of the arrow.
Change the bulb with a new
one (
➁
)
Twin Deodorizer
•
Remove the cover with a flat blade screw driver as shown.
•
Take out the cartridge from the cover and soak it in clean and warm water for at least
4 hrs. Completely dry out the cartridge in sunlight for at least 8 hrs in an open area.
•
Repeat this process once or twice a year.
CLEANING THE ACCESSORIES
Replacement bulbs for both the freezer and refrigerator are available at retail outlets such as
Wal-mart and The Home Depot. Use replacement bulb size E26, maximum 40 watts.
NOTE
Replacement bulbs for both the freezer and refrigerator are available at retail outlets such as
Wal-mart and The Home Depot. Use replacement bulb size E17, maximum 30 watts.
NOTE
Upper
Lower (
RS265 / RS267B
**
/ RS267/ RS269L
**
)
After changing the bulb,
replace the light cover.
Place a flat screwdriver under
the light cover hooks and push
in the direction of the arrow.
Pull the cover in the direc-
tion of the arrow.
After changing the bulb,
replace the light cover.
E26
40W
E17
30W
•
If cartridge is dried in a confined area, there may be some odor.
•
Keep children away from contaminated water.
NOTE