Filter
Top Products
USING THE CONTROL PANEL
Freezer/Fridge (Temperature adjustment)
Press the Freezer or Fridge button until the desired temperature is set.
For lower temperature, press the Freezer or Fridge button until more LED lights (coldest).
For higher temperature, press the Freezer or Fridge button until less LED lights (cold).
Each time you press the Freezer or Fridge button, temperature indicator will change in below order.
Lighting
This icon will light up when you activate the Lighting function. In this case, the dispenser light (under
the display) will be on constantly. If you would like the dispenser light to come on only when using the
dispenser, turn the Lighting function off by pressing the Lighting button.
Power Freeze
This icon will light up when you activate the Power Freeze function. Power Freeze function generates
cool air for 72 hours continuously and it makes the inside of the refrigerator cool faster. This function
is useful when you make ice more quickly. When you have enough, just press and hold the Freeze
(Hold 3 sec for Power Freeze) button again for 3 seconds to cancel the Power Freeze function.
When you use this function the energy consumption of the refrigerator may increase. Remember
to turn it off when you do not need it and return the freezer to your original temperature setting.
Child Lock
This icon will light up when you activate the Lock function. In this case, you will not be able to use the
control panel. If you press and hold the Energy Saver (Hold 3 sec for Child Lock) button again for
3 seconds, you will be able to use the control panel again.
Power Cool
This icon will light up when you activate the Power Cool function. Power Cool function is great for a
quick fridge cool down. If you activate the Power Cool function, inside temperature of the Fridge will
decrease for about two and a half hours.
Energy Saver
This icon will light up when you activate the Energy Saver function. The Energy Saver function is
automatically set to “ON” when power is supplied to the Refrigerator. If condensation occurs on the
doors, turn the Energy Saver function off.
In some places, water drop may be generated on the door part. In this case, it is recommended
to turn off the Energy saver function.
operating _23
02 OPERATING