Filter
Top Products
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
3
WARNING
DANGER! RISK OF CHILD ENTRAPMENT
PROPER DISPOSAL OF THE REFRIGERATOR
Before you throw away your old refrigerator or freezer
When disposing of this or other refrigerators,
remove the door/door seals, door latch so that
small children or animals cannot get trapped
inside.
Leave the shelves in place so that children may
not easily climb inside.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of the
appliance or the rating label inside the fridge to
see which refrigerant is used for your refrigerator.
when this product contains flammable gas (Refrigerant
R600a) contact your local authority in regard to safe
disposal of this product.
CycloPentane used as a insulation blowing gas.
The gases in the insulation material require special disposal
procedure. Please dispose of the packaging material for this
product in an environmentally friendly manner. Please contact
your local authorities in regard to the environmentally safe dis-
posal of this
product. this product contains flammable insulation
blowing gas.
Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are
still dangerous...even if they will sit for "just a few
days."
Do so in a way, that it is not possible for a child to remain
trapped inside.
If you are getting rid of your old refrigerator, please
follow the instructions below to help prevent acci-
dents.
Keep fingers out of the “pinch point” areas;
Clearances between the doors and cabinet are necessarily
small. Be careful while closing the doors when children are in
the area.
CAUTIONS
• The refrigerant used in the refrigerator/freezer and the gases in the insulation material require
special disposal procedures. Ensure that none of the pipes on the back of the appliance are
damaged prior to disposal.
WARNING
HOW TO CONNECT ELECTRICITY
The refrigerator should always be plugged into its
own individual electrical outlet which has a volt-
age rating that matches the rating plate.
This provides the best performance and also prevents overload-
ing house wiring circuits, which could cause a fire hazard from
overheated wires.
Never unplug your refrigerator by pulling the
power cord. Always grip plug firmly and pull
straight out from the outlet.
Make sure that the power plug is not squashed or
damaged by the back of the refrigerator.
Do not bend the power cord excessively or place
heavy articles on it.
Repair or replace immediately all power cords that have become
frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. If
the power cord is damaged, have it replaced immediately by the
manufacturer or its service agent.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
Do not insert the power plug with wet hands.
Unplug the refrigerator before cleaning and mak-
ing repairs.
Do not use a wet or damp cloth when cleaning the plug.
Remove any foreign matter or dust from the power plug pins.
• Otherwise there is a risk of fire.
• If the refrigerator is disconnected from the power supply, you should wait
for at least five minutes before plugging it back.
Pull the power plug out of the socket before
changing the interior light of the refrigerator.
Otherwise, there is a risk of electric shock.
If the wall socket is loose, do not insert the power
plug.
There is a risk of electric shock or fire.