Filter
Top Products
7
TEMPERATURE CONTROL
OPERATING INSTRUCTIONS
Temperature setting
• The temperature controls are in the factory at 3°C for the refrigerator compartment and -18°C for the freezer compartment.
Allow 24 hours for the temperature to stabilize to the preset recommended settings.
• The temperature controls can display both the set temperature as well as the actual temperature in the refrigerator and
freezer. The actual temperature may vary slightly from the set temperature based on usage and operating environment.
How to change the temperature
• Press and release the button. Set will illuminate in the display, as well as the set temperature. To change the temperature,
tap either the button (while set is illuminated)until the desired temperature is displayed. Refrigerator temperature can be
adjusted between 1°Cand 7°C and freezer temperature can be adjusted between -14°Cand -25 °C. Once the desired tem-
perature has been set, the temperature display will clear after 10 seconds. To display the setting temperature, the temper-
ature control button may be tapped.
• When ice cream is stored above -15°C in freezer, it may melt.
• The temperature of the freezer or the refrigerator rises from frequent openings, when sweeping and from
warm food. This may cause the digital display to blink . The digital display will stop
blinking when the freezer
and refrigerator return to the normal temperature.
WARNING
Epel pjt IB-01453B-EN (0.1) 4/15/05 1:17 PM Page 7