Filter
Top Products
setting up _17
01 SETTING UP
In the case of the process to correct the imbalance is the same. Open the doors and adjust them, one
at a time, as follows:
1. Unscrew the nut
1
from the lower hinge until it reaches the upper end of the bolt
2
.
When you release the nut
1
, make sure that you use the Allen wrench provided
3
to loosen
the bolt
2
in a counter-clockwise direction. You should then be able to unscrew the nut
1
with
your fingers.
2. Adjust the height difference between the doors by turning the bolt
2
clockwise or counter
clockwise .
When you turn clockwise , the door will move up.
3
2
1
Wrench
Bolt
Nut
3
2
Wrench
Bolt
setting up your side-by-side
refrigerator
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a leveling refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the refrigerator.
Adjustment part
When the door of the
freezer is higher than the
fridge
DA99-01584A(HM-P)-EN(0.1).indd 17 2007.10.4 5:20:34 PM