Filter
Top Products
16_ setting up
Screw Driver
Leg
Leg
Screw Driver
LEVELING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can
then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to
level the freezer.turning the three screws counter-clockwise.
When the Freezer door is higher than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to
level the fridge.
Refer to the next section for the best way to make very minor adjustments to the doors.
DA99-01584A(HM-P)-EN(0.1).indd 16 2007.10.4 5:20:33 PM