Filter
Top Products
10
Press upper tab of the lamp cover with
some tool such as
- driver and pull it out.
1
- Turn the existing lamp bulb and replace
it with a new one.
- Replace the lamp cover by aligning the
cover at the top and carefully pressing
it into place. (There are one or two
lamps according to the model)
2
REPLACING THE LAMP
Wipe the appliance inside and outside
using a cloth dampened with warm water
and a small amount of detergent.
Before plugging in for the first time,
allow the refrigerator to stabilize for
at least one hour. Allow the freezer
compartment to cool for 2 to 3 hours
before storing food.
Before using
NOTE : Most power failures that are corrected in an hour or two will not affect
your refrigerator temperatures. However, you should minimize the
number of door openings while the power is off. But should the power
failure last more than 24hours, remove all frozen food.
The keys should be kept out the reach of children and not in the vicinity
of the appliance.
BASIC PREPARATION
Loosen
Fasten