Filter
Top Products
19
INSTALLATION OF THE REFRIGERATOR
Check the dimensions of your entrance door to determine whether the refrigerator can pass
through it.
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with a level floor or close to it.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line may be damaged.)
• See “Removing the Freezer Door” on page 25.
Dimension
(inches)
Width
Capacity (Cu. Ft)
Model
RM255AB* / RM257AB*
24.55
without hinge
Case Height
with hinge
with handle
Depth
without door
35 3/4"
68 5/8"
70"
36 1/10"
30 3/8"
Checking the Dimensions of your Entrance Door
Selecting the Location for the Refrigerator
• Allow clearance to the right, left, back and top when installing the refrigerator.
This has the advantage of reducing power consumption.
• Do not install the refrigerator where the temperature will go below 50°F (10°C).
Allow sufficient space for air circulation of the internal cooling system.
•
When the refrigerator does not have enough space, the internal cooling system may not work correctly.
NOTE
1 inch
1/8 inch
1 inch
NOTE
INSTALLATION INSTRUCTIONS