Filter
Top Products
13
When you open the refrigerator door, a light comes on to help you
find what you are looking for more easily. If you need to replace
the bulb(s), proceed as follows.
Type A or F
1 Remove the chiller compartment by:
◆ Pulling it towards you until it meets the stop
◆ Tilting the front up slightly and continuing to pull the
compartment towards you
2 With a flat-bladed screwdriver, prise out the upper part of the light
cover. Pull the cover free.
3 Unscrew and remove the two light bulbs.
4 Insert two new bulbs (maximum of 15 W, E14 small screw base).
5 Replace the light cover by pushing it until it clicks back into place.
6 Replace the chiller compartment by sliding it back into position.
Type B, C, D or E
1 Remove the chiller compartment (types B and E only) by:
◆ Pulling it towards you until it meets the stop
◆ Tilting the front up slightly and continuing to pull the
compartment towards you
2 Remove any shelves that are in front of the light cover, by:
◆ Lifting them slightly
◆ Pulling them towards you
3 With a flat-bladed screwdriver, prise out the lower part of the light
cover. Pull the cover free.
4 Unscrew and remove the light bulb.
5 Insert a new bulb (maximum of 15 W, E14 small screw base).
6 Replace the light cover by:
◆ Aligning the three tabs at the top
◆ Pushing the upper part into position first
◆ Then pushing the lower part into position
7 Replace the chiller compartment and/or any shelves by sliding
them back into position.
GB
Changing the Light Bulb(s)
TEMP CONTROL
TEMP CONTROL
SR-28/29/42/43/ENG 18-12-59 15:30 Page 13