14
INTERIOR LIGHT IN THE FREEZER (BASIC MODEL ONLY) / REFRIGERATOR
INTERIOR LIGHT IN THE FREEZER (MODEL WITH ICE AND WATER
DISPENSER)
NOTE
•
When cleaning the appliance or if you are not going to use it for a long time, remove the power plug, leave
the doors open and keep the appliance dry.
•
Do not clean it by spraying it directly with water.
•
Do not clean it with benzene, thinner or car detergent.
CHANGING THE INTERIOR LIGHT
Before changing the interior light, unplug the appliance from the power supply. If you
experience difficulty when changing the light, contact your service centre.
WARNING
Place a flat screwdriver under
the light cover hooks and push
in the direction of the arrow.
Pull the cover in the direction
of the arrow.
After changing the bulb,
replace the light cover.
Lift and pull out the ice maker cover (
➀
).
Use a screwdriver to remove the light cover (
➁
).
Replace the bulb with a new one (
➂
), and then secure
the light cover back into place using a screwdriver.
Replace the ice maker cover.
➀
➁
➂
Extra refrigerating compartment (model with Home Bar)
•
Use a damp cloth to clean the extra refrigerating compartment. Then wipe it with a dry cloth.
Rubber door seals
•
If the rubber door seals are dirty, the door will not close properly and the refrigerator and
freezer will be unable to function efficiently. Clean them with a mild detergent and damp cloth.
Then wipe them with a dry cloth.
Ice and water dispenser and drainage grid (model with ice and water dispenser )
•
Use a damp cloth to clean the ice and water dispenser. Then wipe it with a dry cloth.
•
Keep the ice and water dispenser and drainage grid dry.
DA68-00500P 6/26/02 2:34 PM Page 14