Filter
Top Products
38
1
Press MENU. Then press ▲ or ▼
to select “Setup” menu, then
press .
2
Press ▲ or ▼ to select “Reset”.
3
Press or ENTER to return your settings to the factory
settings.
4
Press MENU to return to the normal screen.
NOTE:
• Signal meter feature is not
available for analog channels.
• After 180 seconds, DTV Signal
screen will return to normal TV-
operation automatically.
•You also can reset the settings by
pressing RESET when “Setup”
menu is selected.
Checking the Digital-signal strength
This TV will allow you to view the digital signal meter for
digital channels.
1
Press MENU. Then press ▲ or ▼
to select “Setup” menu, then
press
.
2
Press ▲ or ▼ to select “DTV
Signal”.
3
Press or ENTER to check the
Digital-signal strength.
4
Press MENU to return to the normal screen.
Signal Level 85
Weak Normal Good
Checking the Digital-signal strength/
Resetting your settings
Resetting your settings
The Reset function returns your settings to the factory set-
tings.
33S0101A_En_p36-39 7/23/07, 3:15 PM38