Sanyo EM-S156AS Microwave Oven User Manual


 
8
OPERATION INSTRUCTIONS
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
Setting the clock
1. Touch CLOCK pad.
2. Use the number pads to enter the correct time.
3. Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is first
plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. If you prefer to not have the clock displayed,
touch RESET.
Setting the kitchen timer
1. Touch KITCHEN TIMER.
2. Enter the amount of time by touching the
number pads.
3. Touch STOP/START.
NOTE:
·Maximum time you can enter is 99 minutes and 99
seconds. Time countdown can be seen in display by
touching KITCHEN TIMER pad during timing
process.
·Touch KITCHEN TIMER and then RESET to cancel
TIMER during timing process.
Setting a cooking program
A. One-stage Cooking
1. Use the number pads to set a cooking time. You
can set a cooking time from one second to 99
minutes and 99 seconds.
2. If you want to set a power level other than 100%
power, touch POWER, then use the number pads
to enter the power level.
3. Touch STOP/START to start cooking.
Use digits to set a cooking power level:
Number pad Cooking power
10 100%
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
0 0%
B. Two-stage Cooking
Some recipes require different stages of cooking at
different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO
NOT TOUCH STOP/START
2. SET STAGE 2:
Touch COOK TIME then enter proper cooking time
and (lower) power level. (Most 2-stage recipes use
lower power for second stage.)
3. Touch STOP/START.
NOTE:
·
After stage 1 time has elapsed, one signal sounds,
signaling the beginning of stage 2.
·After total time has elapsed, signals sound and END
appears in display. Touch any pad or open oven door
to clear END before starting another cooking
function.
Speed defrost
The longest defrosting time is 99 minutes and 99
seconds.
1. Touch SPEED DEFROST.
2. Enter desired defrosting time by touching
correct number pads.
3. Touch STOP/START.
NOTE:
·After time has elapsed signals sound and END
appears in display. Touch any pad or open the door to
clear END before starting another cooking function.
·You may need to turn food over when the oven
signals after ½ cooking time.
·After setting SPEED DEFROST, oven can be
programmed to automatically switch to one or
two-stage cooking.