Sanyo MDF-136 Freezer User Manual


 
13
OPTIONAL COMPONENTS
Temperature recorder
WARNING
Always disconnect the power supply to the unit prior to attachment of a temperature recorder in
order to prevent electric shock or injury.
An automatic temperature recorders is available for this freezer as the optional component. The type of
the recorder is MTR-G85. For the attachment, the mounting kit (MDF-S740) is necessary.
Following shows the attachment procedure.
1. Remove four screws on the cover for the recorder
mounting space and take off the cover. (Fig. 1)
2. Fix temperature recorder to the mounting by using 2
screws and fixture enclosed with the mounting kit.
(Fig. 2)
3. Connect the power cord of the recorder with the
coupler in the unit compartment of the freezer.
4. Remove the caps and insulation covering the access
port on the chamber side and unit compartment side.
(Fig. 3)
Then pass the recorder sensor through this port to go
into the freezer chamber.
5. Insert the recorder sensor into the tube enclosed with
the mounting kit.
Fig. 1
Fig. 3
Front view
Door
Chamber
Cap
Insulation
Fig.2
Fixture